Please put a new roll paper. Turn the control lock key to P position.
Plug in the power code, holding down the C key.

Please set MF008_N4 to "1".

Turn the control lock key to P position.
1 → X/Time → YY MM DD → Cash/Tend

Turn the control lock key to P position.
2 → X/Time → hh mm → Cash/Tend

ENT/RLS → N1 N2 N3 N4 N5 → a Department key → #/ST
　N1 :
　　　0 = Regular Sales
　　　1 = Enable food stamp sales
　N2 :
　　　0 = Disable single-item cash sales
　　　1 = Enable single-item cash sales
　　　2 = Enable maltiple item entry and negative department
　　　3 = Enable single item sale and negative department
　N3 : 0 to 6
　　　Limit the number of digits, If you enter 1 to 6, one digit to six digits are allowed.
　　　If you press 0, seven digits will be allowed.
　N4 : 0 to 9
　　　: Assign the department to one of 10 groups.
　N5 N6 :
　　　00: Do not add TAX for the department
　　　01: Add TAX1
　　　02: Add TAX2
　　　03: Add TAX1 and TAX2
　　　04: Add TAX3
　　　05: Add TAX1 and TAX3
　　　06: Add TAX2 and TAX3
　　　07: Add TAX1, TAX2 and TAX3
　　　10: Add TAX4 to the department.
　　　11: Add TAX1 and TAX4.
　　　12: Add TAX2 and TAX4.
　　　13: Add TAX1, TAX2 and TAX4
　　　14: Add TAX3 and TAX4
　　　15: Add TAX1, TAX3 and TAX4
　　　16: Add TAX2, TAX3 and TAX4
　　　17: Add TAX1, TAX2 ,TAX3 and TAX4

Plug in the power code, holding down the C key.

Turn the control lock key to P position.
n → PO → XXXXXX (Max 6 digits) → Cash/Tend
(*) n= tax number (n = 1,2,3 or 4 : Tax1,Tax2,Tax3 or Tax4)

It is the error for the printer. Please check whether the printer cable is correctly connected to the mainboard?

The memory capacity for the sales data has been approaching to the maximum.
Please issue the Z report and clear the stored sales data.

Please press RET key after inputting "12345677" in P position. The version number can be displayed.