Please put a new roll paper. Turn the control lock key to P position.
Plug in the power code, holding down a specified key for selecting language.

Please set MF001_N7 to "1".

Turn the control lock key to P position.
1 → X/Time → YY MM DD → Cash/Tend
(*)Related flags
　　MF006 N8 N7:
　　　　00 : Y-M-D
　　　　01 : M-D-Y
　　　　10 : D-M-Y

Turn the control lock key to P position.
2 → X/Time → hh mm → Cash/Tend
(*)Display procedure :
　Turn the control lock key to R position.
　Press the X/Time key

Turn the control lock key to P position.
RLS → N1 N2 N3 N4 N5 N6 N7 → a Department key → #/ST
　N1 : 0 to 9
　　　: The department to one of 10 groups.
　N2 N3 :
　　　01: Enable single-item cash sale
　　　02: Enable negative department sale
　　　03: Enable single-item cash sale and negative department
　N4 N5 : 00 to 69
　　　: High amount lock out . If you press 0, 7 digits will be allowed.
　　　　N4 limits the length of digits while N5 specifies the highest number of amount.
　　　Example: N4 = 4,N5 = 6 : HALO for the department will be 69.99
　　　　70.00 is not allowed.
　N6 N7 :
　　　00: Do not add TAX for the department
　　　01: Add TAX1
　　　02: Add TAX2
　　　03: Add TAX1 and TAX2
　　　04: Add TAX3
　　　05: Add TAX1 and TAX3
　　　06: Add TAX2 and TAX3
　　　07: Add TAX1, TAX2 and TAX3
　　　10: Add TAX4 to the department.
　　　11: Add TAX1 and TAX4.
　　　12: Add TAX2 and TAX4.
　　　13: Add TAX1, TAX2 and TAX4
　　　14: Add TAX3 and TAX4
　　　15: Add TAX1, TAX3 and TAX4
　　　16: Add TAX2, TAX3 and TAX4
　　　17: Add TAX1, TAX2 ,TAX3 and TAX4

Plug in the power code, holding down a specified key for selecting language.
(*)Refer to following descriptions.
C :ENGLISH
2 :SPANISH
3 :GERMAN

Turn the control lock key to P position.
n → PO → XXXXXX (Max 6 digits) → ENT
(*) n= tax number (n = 1,2,3 or 4 : Tax1,Tax2,Tax3 or Tax4)

It is out of roll paper. Please install a new roll paper.

Dry-cell battery capacity is low. Please replace your dry-cell battery.

The transaction has not been finished. Press a finalizing key to close the registration.

Report and E/Journal memory capacities have been approaching to the maximum. Please issue the Z report and clear the E/J memory.

Please do the "Half Reset". The Version number can be printed on paper.
(*) Procedure of the Half reset
　Remove the power code from the outlet.
　Turn the control lock key to P position.
　Wait 5 sec.
　Plug in the power code.